Audac Acoustic reference Microphone 
Varenr.: AU-CMT500

The CMT500 is an acoustic reference microphone with an omnidirectional pickup pattern based on a small & accurate back elektret condenser capsule.It is especially designed to be used for all kinds of measurement applications, such as noise monitoring purposes, room acoustic measurements or speaker measurements.

Vejl. pris :  inkl. moms
Vejl. pris : ex. moms

Audac Outdoor kit for CMT500 
Varenr.: AU-CMT510

In combination with the CMT510 outdoor kit, the CMT500 can also be used for permanent outdoor installation in all weather conditions. This combination makes the CMT500 the perfect solution for permanent outdoor noise monitoring systems.

Vejl. pris :  inkl. moms
Vejl. pris : ex. moms

Audac Sound level meter 
Varenr.: AU-SLM700

The SLM700 is a stable, safe and reliable sound level meter, designed for all kinds of sound level measurements and compliant to all international standards for sound level meters.
It can be switched between two different weighting frequency filters (A and C type) and has a fast (peak value, 125 msec) and slow (average value, 1sec) operation mode. Other functions like a hold button and a Minimum/Maximum mode are also present.

Vejl. pris :  inkl. moms
Vejl. pris : ex. moms

Audac Sound level meter calibrator 
Varenr.: AU-SLC346

The SLC346 is a Sound Level Calibrator device which can be used to calibrate the AUDAC SLM700 or any other Sound Level Meter, or can be used as a reference for any other sound calibrations.

Because of regulations, the sound level should be monitored at many different locations to prevent ear damage and noise nuisance.

To make sure the measurements are reliable,the accuracy of the sound level meters should be regularly verified. The AUDAC SLC336 Sound Level Calibrator is the perfect companion for this job.

Vejl. pris :  inkl. moms
Vejl. pris : ex. moms

Earthworks M23 Super nøjagtig måle mikrofon 9Hz - 23kHz 
Varenr.: EWS-M23

The M Series has become the accepted standard for affordable, reliable reference and measurement microphones that are accurate in the time domain and frequency response. They are remarkably stable with respect to temperature and atmospheric conditions and are optimized for clean, very fast impulse performance providing accurate wideband response with virtually no handling noise.

Vejl. pris :  inkl. moms
Vejl. pris : ex. moms

Earthworks M30 Super nøjagtig måle mikrofon 5Hz - 30kHz 
Varenr.: EWS-M30

The M Series has become the accepted standard for affordable, reliable reference and measurement microphones that are accurate in the time domain and frequency response. They are remarkably stable with respect to temperature and atmospheric conditions and are optimized for clean, very fast impulse performance providing accurate wideband response with virtually no handling noise.

30kHz flat frequency response
Ideally suited for acoustical measurements including loudspeaker design and quality control, sound system setup and troubleshooting, room acoustics, or any application where an accurate free-field measurement microphone is required
Improved version of the SMAARTMIC™ previously offered by EAW
Omnidirectional polar pattern
Flat frequency response, fast impulse response and exceptional polar characteristics
Used by SMAART™, MLSSA™, Spectrafoo™, TEF™ and RTA in addition to acoustic measurement systems manufactured by dbx, DEQX and others
Meets or exceeds ANSI Type 1 and applicable IEC 61094 requirements
Requires 48V Phantom Power
Each M Series microphone is delivered with its own calibration chart providing its individually measured open-circuit sensitivity and the frequency response curve
Electronic Calibration File available
Operating Temp Range: -10 deg C to +40 deg C ( 14 deg. F to 104 deg. F)
Storage Temp Range: -20 deg C to +50 deg C ( -4 deg. F to 122 deg. F)

Vejl. pris :  inkl. moms
Vejl. pris : ex. moms

LCR meter 120 & 1000 Hz test freq, 
Varenr.: AU-LCR700

The LCR700 is a digital LCR measurement appliance, essential for sound and electronic engineers.

Measurements can be made for induction, capacitance and resistance and the dissipation factor (D) can be read-out on a second display. It can be set to auto-ranging or manual mode, and all measurements can be carried out on two different frequency’s, 120Hz and 1kHz. This allows measurements of great accuracy on all kinds of specimen.

Vejl. pris :  inkl. moms
Vejl. pris : ex. moms

NTI Excel line acoustic analyzer 
Varenr.: XL2

Vejl. pris :  inkl. moms
Vejl. pris : ex. moms

NTI Målemikrofon for XL2, 1/4" kuglekarakteristik 
Varenr.: M4260

Vejl. pris :  inkl. moms
Vejl. pris : ex. moms

Procab HDMI tester 
Varenr.: HDM900

HDMI kabel tester

Vejl. pris :  inkl. moms
Vejl. pris : ex. moms

RTW mini-Dac AES/EBU test 
Varenr.: RTW-1230

The MiniDac is a handy test device for quick-checking AES/EBU interfaces with 44.1 to 96 kHz sampling rates.
+ D/A converter
+ Headphone output AES/EBU Digital

Vejl. pris :  inkl. moms
Vejl. pris : ex. moms